|
 |
The 36" Oak Enclosure over this 30 gallon freshwater planted
aquarium has a 2x36w Bright Kit™ with one 34.5" long reflector installed in
the middle row and a night light is installed in the back. The two 36w bulbs
are on one timer and also connected to the enclosure switch. The night
light is on a separate
timer. |
 |
A 30" Oak Enclosure with the ballast and sockets from one 2
x 55w Bright Kit installed. The wiring is kept neat with the help of self-adhesive wire
guides, five of which are included with each enclosure. {Out of date photo.
New 2x55w Bright Kit includes moisture-resistant endcaps.} |
 |
Here's the same 30" Enclosure after the reflectors, bulb holders and
bulbs have been installed. |
 |
A 20" Enclosure with a 2 x 36w Bright Kit installed. The
8-facet reflector measures 17.5"L x 7"W x 2"H and fits in this enclosure
very nicely. Not such a great photo, but a great lighting setup for a 10 gallon or
15H mini-reef. |
 |
36" Black Enclosure with fan installed along with wiring and
sockets from two 1x96w kits. Two power cords allow each light to be on a separate timer and the fan is
wired to come on with the front light. (Another out-of-date photo.
Current 96w kits have moisture-resistant endcaps.) |
 |
Same 36" Black Enclosure after the reflectors, bulb holders
and bulbs have been installed. The enclosure switch is wired to one 1x96w
kit so one of the bulbs can be turned off even when the timer is set to "on." |
Click HERE to go back to Finished
Enclosures.
|
